Zeroth law of thermodynamics
If two bodies A and B are in thermal equilibrium and A and C are also in thermal equilibrium then B and C are in also in thermal equilibrium
All bodies in thermal equilibrium are assigned equal temperature.
Heat flows from the body at higher temperature to the body at lower temperature
COMPANION SITES: www.iit-jee-chemistry.blogspot.com, www.iit-jee-maths.blogspot.com. A google search facility is available at the bottom of the page for searching any topic on these sites.
Showing posts with label Laws and theories. Show all posts
Showing posts with label Laws and theories. Show all posts
Monday, October 20, 2008
Friday, October 17, 2008
ch. 25 Calorimetry - Laws and Theories
Principle of Calorimetry
Neglecting any heat exchange with the surroundings, the principle of calorimetry states that the total heat given by the hot objects equals the total heat received by the cold objects.
Mechanical equivalent of heat
W = JH
Neglecting any heat exchange with the surroundings, the principle of calorimetry states that the total heat given by the hot objects equals the total heat received by the cold objects.
Mechanical equivalent of heat
W = JH
Sunday, July 13, 2008
The Nucleus - Laws
Law of radioactive decay
N = N0e- λ t
where
N = number of active nuclei at time t
N0 = number of active nuclei at t = 0.
λ = decay constant
-dN/dt = λN
-dN/dt give the number of decays per unit time and is called the activity (A) of the sample
A = λN
A = A0e- λ t
Lawson criterion for fusion reactor
In order to get an energy output greater than the energy input, a fusion reactor should achive
n τ >10^14 s/cm³
where
n = the density of the interacting particles
τ = confinement time
the quantity n τ in s/cm³ is called Lawson number
N = N0e- λ t
where
N = number of active nuclei at time t
N0 = number of active nuclei at t = 0.
λ = decay constant
-dN/dt = λN
-dN/dt give the number of decays per unit time and is called the activity (A) of the sample
A = λN
A = A0e- λ t
Lawson criterion for fusion reactor
In order to get an energy output greater than the energy input, a fusion reactor should achive
n τ >10^14 s/cm³
where
n = the density of the interacting particles
τ = confinement time
the quantity n τ in s/cm³ is called Lawson number
X-rays - laws and theories
Moseley’s law
Moseley measured the frequencies of characteristic X-rays from large number of elements and plotted the square root of th frequency against its position number in the periodic table.
The observations can be mathematically expressed as
√(v) = a(Z-b)
v = the frequency of characteristic X-rays from the elements\
Z = atomic number
a, b are constants
Bragg’s law
2d sin θ = n λ
d = interplanar spacing of the crystal on which X-rays are incident
θ = is the incident angle at which X-rays are strongly reflected.
n = 1,2,3 …
λ = wave length of X-rays
Application of Bragg’s law:By using a monochromatic X-ray beam (having a single wave length) and noting the angles of strong reflection, the interplanar spacing d and several information about the structure of the solid can be obtained.
Moseley measured the frequencies of characteristic X-rays from large number of elements and plotted the square root of th frequency against its position number in the periodic table.
The observations can be mathematically expressed as
√(v) = a(Z-b)
v = the frequency of characteristic X-rays from the elements\
Z = atomic number
a, b are constants
Bragg’s law
2d sin θ = n λ
d = interplanar spacing of the crystal on which X-rays are incident
θ = is the incident angle at which X-rays are strongly reflected.
n = 1,2,3 …
λ = wave length of X-rays
Application of Bragg’s law:By using a monochromatic X-ray beam (having a single wave length) and noting the angles of strong reflection, the interplanar spacing d and several information about the structure of the solid can be obtained.
Photoelectric effect and dual nature - Laws
Einstein’s photoelectric equation
Kmax = hc/λ – φ = h υ - φ
Where
Kmax = Maximum kinetic energy of an electron that comes out due to collision with a photon
h = Planck constant 6.626*10^-34 J-s or 4.136*10^-15 eV-s
c = speed of light in vacuum 299,792,458 m/s or 3*10^8 m/s
λ = wave length of light represented by photon
φ = work function of the material from which the electron is coming
υ = frequency of the wave of light represented by photon
de Broglie wavelength equation for matter waves
λ = h/p
where
λ = wave length
h = Planck constant 6.626*10^-34 J-s or 4.136*10^-15 eV-s
p = momentum of the particle
Kmax = hc/λ – φ = h υ - φ
Where
Kmax = Maximum kinetic energy of an electron that comes out due to collision with a photon
h = Planck constant 6.626*10^-34 J-s or 4.136*10^-15 eV-s
c = speed of light in vacuum 299,792,458 m/s or 3*10^8 m/s
λ = wave length of light represented by photon
φ = work function of the material from which the electron is coming
υ = frequency of the wave of light represented by photon
de Broglie wavelength equation for matter waves
λ = h/p
where
λ = wave length
h = Planck constant 6.626*10^-34 J-s or 4.136*10^-15 eV-s
p = momentum of the particle
Huygen’s principle
Various points of an arbitrary surface, when reached by a wavefront, become secondary sources of light emitting secondary wavelets. The disturbance beyond the surface results from the superposition of these secondary wavelets.
(chapter: light waves)
(chapter: light waves)
Sound waves – Laws and Theories
Revision notes
Newton’s formula for speed of sound in a gas
v = √(P/ρ)
The density of air at temperature 0°C and pressure 76 cm of mercury column is ρ = 1.293 kg/m³
So P = .76m*(13.6*10^3 kg/ m³)*(9.8 m/s²) = 101292.8
Hence P/ ρ = 78339.37
√(P/ρ) = 279.8917 m/s
The velocity of sound in air comes as 280 m/s.
But the measured value of speed of sound in air is 332 m/s
Laplace suggested a correction. With Laplace’s correction the formula is
v = √( γ P/ρ)
where γ = Cp/Cv (Cp and Cv are molar heat capacities at constant pressure and constant volume respectively)
With this new formula the value comes out to be 331.1723 closer to 332 m/s.
Doppler effect
The apparent change in frequency of the wave due to motion of the source or the observer is called Doppler Effect.
Mach number
Macn Number = µs/v
µs = speed of source creating the sound wave
v = velocity of sound wave
Newton’s formula for speed of sound in a gas
v = √(P/ρ)
The density of air at temperature 0°C and pressure 76 cm of mercury column is ρ = 1.293 kg/m³
So P = .76m*(13.6*10^3 kg/ m³)*(9.8 m/s²) = 101292.8
Hence P/ ρ = 78339.37
√(P/ρ) = 279.8917 m/s
The velocity of sound in air comes as 280 m/s.
But the measured value of speed of sound in air is 332 m/s
Laplace suggested a correction. With Laplace’s correction the formula is
v = √( γ P/ρ)
where γ = Cp/Cv (Cp and Cv are molar heat capacities at constant pressure and constant volume respectively)
With this new formula the value comes out to be 331.1723 closer to 332 m/s.
Doppler effect
The apparent change in frequency of the wave due to motion of the source or the observer is called Doppler Effect.
Mach number
Macn Number = µs/v
µs = speed of source creating the sound wave
v = velocity of sound wave
Wave Motion - Waves on a String - Laws
Principle of Superposition of waves
When two or more waves simultaneously pass through a point, the disturbance at the point is given by the sum of disturbances each wave would produce in absence of the other wave(s).
Laws of Transverse Vibrations of a String: Sonometer
1. Law of length: the fundamental frequency of vibration of a string (fixed at both ends) is inversely proportional to the length of the string provided its tension and its mass per unit length remain the same.
v α 1/L if F and µ are constant.
2. Law of tension; the fundamental frequency of a string is proportional to the square root of its tension provided its length and the mass per unit length remain the same.
v α √(F) if L and µ are constant.
3. Law of mass: The fundamental frequency of a string is inversely proportional to the square root of the linear mass density, i.e., mass per unit length provided the length and the tension remain the same.
v α 1/ √(µ) if L and F are constant.
When two or more waves simultaneously pass through a point, the disturbance at the point is given by the sum of disturbances each wave would produce in absence of the other wave(s).
Laws of Transverse Vibrations of a String: Sonometer
1. Law of length: the fundamental frequency of vibration of a string (fixed at both ends) is inversely proportional to the length of the string provided its tension and its mass per unit length remain the same.
v α 1/L if F and µ are constant.
2. Law of tension; the fundamental frequency of a string is proportional to the square root of its tension provided its length and the mass per unit length remain the same.
v α √(F) if L and µ are constant.
3. Law of mass: The fundamental frequency of a string is inversely proportional to the square root of the linear mass density, i.e., mass per unit length provided the length and the tension remain the same.
v α 1/ √(µ) if L and F are constant.
Permanent magnets - Laws
Tangent law of perpendicular fields
External magnetic field B may be written in terms horizontal component of earth’s magnetic field BH and deflection of compass needle θ.
B = BH tan θ
Gauss’s law for magnetism
∫B.dS = µ0*minside0
But minside0 is zero as we do not have an isolated magnetic pole in nature. The smallest unit of the source of magnetic field is a magnetic dipole where the net magnetic pole is zero.
Hence Gauss’s law for magnetism states that
∫B.dS = 0
External magnetic field B may be written in terms horizontal component of earth’s magnetic field BH and deflection of compass needle θ.
B = BH tan θ
Gauss’s law for magnetism
∫B.dS = µ0*minside0
But minside0 is zero as we do not have an isolated magnetic pole in nature. The smallest unit of the source of magnetic field is a magnetic dipole where the net magnetic pole is zero.
Hence Gauss’s law for magnetism states that
∫B.dS = 0
Magnetic field due to a current - Laws
Magnetic field due to a current
Biot Savart Law
dB = (µ0/4 π)*(idl sin θ/r²)
Ampere’s law
The circulation ∫B.dl over closed surface = µ0*i
Biot Savart Law
dB = (µ0/4 π)*(idl sin θ/r²)
Ampere’s law
The circulation ∫B.dl over closed surface = µ0*i
Gauss’s law
Gauss’s law
The flux of the net electric field through a lcosed surface equals the net charge enclosed by the surface divided by ε0
∫E.ds over the closed surface = charge enclosed by the surface/ ε0
The flux of the net electric field through a lcosed surface equals the net charge enclosed by the surface divided by ε0
∫E.ds over the closed surface = charge enclosed by the surface/ ε0
Electromagnetic Waves - Laws
Revision notes
Maxwell’s displacement current
Maxwell generalised Ampere’s law to
∫B.dl = µ0(i + id)
id = ε0*(d ΦE/dt)
Where
ΦE/ = the flux of the electric field through the area bounded by the closed curve along which the circulation of B is calculated.
Maxwell termed id as displacement current
Maxwell’s Equations
Gauss’s laws for electricity and magnetism, Faraday’s law and Ampere’s are collectively known as Maxwell’s equations
Maxwell’s displacement current
Maxwell generalised Ampere’s law to
∫B.dl = µ0(i + id)
id = ε0*(d ΦE/dt)
Where
ΦE/ = the flux of the electric field through the area bounded by the closed curve along which the circulation of B is calculated.
Maxwell termed id as displacement current
Maxwell’s Equations
Gauss’s laws for electricity and magnetism, Faraday’s law and Ampere’s are collectively known as Maxwell’s equations
Electromagnetic induction - Laws
Faraday’s law of electromagnetic induction
Whenever the flux of magnetic field through the area bounded by a closed conducting loop changes, an emf is produced in the loop. The emf is given by
E = -dΦdt
Where
Φ = ∫B.dS is the flux of the magnetic field through the area.
Lenz’s law
The direction of the induced current is such that it opposes the change that has induced it.
Whenever the flux of magnetic field through the area bounded by a closed conducting loop changes, an emf is produced in the loop. The emf is given by
E = -dΦdt
Where
Φ = ∫B.dS is the flux of the magnetic field through the area.
Lenz’s law
The direction of the induced current is such that it opposes the change that has induced it.
Paschen’s law
V = f(pd)
V = sparking potential of a gas
P = pressure of the gas
D = separation between the electrodes
V = sparking potential of a gas
P = pressure of the gas
D = separation between the electrodes
Coulomb’s law
Force exerted by a charged particle on the other charged particle is
F = kq1q2/r²
k = 8.98755*109 N-m²/C²
q1,q2 = charges
r = distance between them
F = kq1q2/r²
k = 8.98755*109 N-m²/C²
q1,q2 = charges
r = distance between them
Equipartition of Energy
Equipartition of energy states that the average of energy of a molecule in a gas associated with each degree of freedom is ½ kT where k is the Boltzmann constant and T is its absolute temperature.
(Chapter; Sp Heat capacities of gases)
(Chapter; Sp Heat capacities of gases)
Saturday, July 12, 2008
Heat Transfer Laws
Prevost Theory of Exchange
According to this theory all bodies radiate at all temperatures. The amount of thermal radiation radiated per unit time depends on the nature of the emitting surface, its area and its temperature.
Every body absorbs part of the thermal radiation emitted by the surrounding bodies when this radiation falls on it.
If a body radiates more than what it absorbs, its temperature falls.
Kirchoff’s law
The ratio of emissive power to absorptive power is the same for all bodies at a given temperature and is equal to the emissive power of a blackbody at that temperature.
Thus
E(body)/a(body) = E(blackbody)
Stefan-Boltzmann Law
The energy of thermal radiation emitted by per unit time by a black body of surface area A is given by
U = σAT4
Where
σ = Stefan Boltzmann constant = 5.67*10-8 W/m²-K4
Newton’s law of cooling
dT/dt = -bA(T-T0)
b = a constant depends on the nature of the surface involved
a = surface area exposed of the body
T- T0) = temperature difference between the body and surrounding
According to this theory all bodies radiate at all temperatures. The amount of thermal radiation radiated per unit time depends on the nature of the emitting surface, its area and its temperature.
Every body absorbs part of the thermal radiation emitted by the surrounding bodies when this radiation falls on it.
If a body radiates more than what it absorbs, its temperature falls.
Kirchoff’s law
The ratio of emissive power to absorptive power is the same for all bodies at a given temperature and is equal to the emissive power of a blackbody at that temperature.
Thus
E(body)/a(body) = E(blackbody)
Stefan-Boltzmann Law
The energy of thermal radiation emitted by per unit time by a black body of surface area A is given by
U = σAT4
Where
σ = Stefan Boltzmann constant = 5.67*10-8 W/m²-K4
Newton’s law of cooling
dT/dt = -bA(T-T0)
b = a constant depends on the nature of the surface involved
a = surface area exposed of the body
T- T0) = temperature difference between the body and surrounding
Principle of Calorimetry
Principle of Calorimetry
Neglecting any heat exchange with the surroundings, the principle of calorimetry states that the total heat given by the hot objects equals the total heat received by the cold objects.
Neglecting any heat exchange with the surroundings, the principle of calorimetry states that the total heat given by the hot objects equals the total heat received by the cold objects.
Laws of reflection
Laws of reflection
1. The angle of incidence is equal to the angle of reflection.
2. The incident ray, the reflected ray and the normal to the reflecting surface are coplanar.
(Chapter Geometrical optics)
1. The angle of incidence is equal to the angle of reflection.
2. The incident ray, the reflected ray and the normal to the reflecting surface are coplanar.
(Chapter Geometrical optics)
Subscribe to:
Posts (Atom)