Magnetic field due to a current
Biot Savart Law
dB = (µ0/4 π)*(idl sin θ/r²)
Ampere’s law
The circulation ∫B.dl over closed surface = µ0*i
COMPANION SITES: www.iit-jee-chemistry.blogspot.com, www.iit-jee-maths.blogspot.com. A google search facility is available at the bottom of the page for searching any topic on these sites.
Showing posts with label Magnetic field. Show all posts
Showing posts with label Magnetic field. Show all posts
Sunday, July 13, 2008
Sunday, March 23, 2008
Concept Review Ch.34 Magnetic Field
Definition of magnetic field
Magnetic field exerts force on a charge particle
Some facts about the magnetic force
a) From a point P, a charge particle can move in any direction or along any line. Along one of these possible lines, if the charge is moving, there is no magnetic force. Magnetic force is defined to be acting along this line.
b) The magnitude of the magnetic force is proportional to the product of speed of the charged particle v and sinθ, θ being the angle the speed makes with the line along which magnetic field is acting. Hence magnetic force is proportional to |v*sinθ|
c) The direction of the magnetic force is perpendicular to the direction of the magnetic field as well as to direction of the velocity.
d) The magnetic force is also proportional to the magnitude of charge q.
e) Its direction is different and opposite for positive and negative charges.
Magnetic field can be defined mathematically as
Vr(F) = qVr(v) × Vr(B) (34.1)
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
Units of magnetic field
The SI unit of magnetic field is newton/ampere-metre. It is written as Tesla.
Tesla is newton/ampere-metre. Tesla is also defined as weber/m².
Another unit in common use is gauss .
1 T = 104 gauss
We have magnetic field of the order of 10-5 near the earth's surface.
superconducting magnets can create a magnetic field of the order of 10 T.
Earlier, the concept of magnetic field was referred to as magnetic induction.
Electromagnetic field
Electric field and magnetic field are not basically independent. They are two aspects of same entity electromagnetic field. Whether th electromagnetic field will show up as an electric field or a magnetic field or a combination depends on the frame from which we are looking at the field.
Motion of a Charged particle in a uniform magnetic field.
Magentic force on a charged particle is perpendicular to its velocity. Hence there will not any change in its speed or kinetic energy.
The magnetic force will deflect the particle without changing speed and in a uniform field, the particle will move along a circle perpendicular to the magnetic field. The conclusion is that, the magnetic force provides centripetal force.
If r be the radius of the circle,
qvB = mv²/r (LHS is the expression for magnetic force and RHS is expression mass * acceleration)
r = mv/qB ...(34.2)
The time taken to complete the circle is
T = 2πr/v = 2πm/qB ... (34.3)
The time period or time taken to complete one circle is independent of speed.
But the radius (34.2) depends on v. Hence if speed increases, the radius is larger.
Frequency of revolutions is
ν = 1/T = qB/2πm ... (34.4)
This frequency is called cyclotron frequency.
If the velocity of charge is not perpendicular to the magnetic field, the resultant path will be a helix.
The radius of the path will be determined by velocity component which is perpendicular to the magnetic field.
Magnetic Force on a current carrying wire
In a current carrying wire, electrons, which are charge carrying particles are moving and hence in a magnetic field, a current carrying conductor would experince magnetic force.
Vr(F) = iVR(l)×Vr(B) ...(34.6)
Vr is used to denote vector.
The quanity iVr(l) denotes current element of length of l.
Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsinθ
Where i = current in the loop
A = area
B = magnetic field
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define
Vr(Г) = iVr(A)× Vr(B) ...(34.7)
iVr(A) can be termed as Vr(μ) the magnetic dipole moment of simply magentic moment of the current loop.
-------------------
In the material below vectors shown in bold letters.
Definition of magnetic field
Magnetic field exerts force on a moving charged particle
Some facts about the magnetic force
a) From a point P, a charged particle can move in any direction or along any line. Along one of these possible lines, if the charge is moving, there is no magnetic force. Magnetic force is defined to be acting along this line.
b) The magnitude of the magnetic force is proportional to the product of speed of the charged particle v and sinθ, θ being the angle the speed makes with the line along which magnetic field is acting. Hence magnetic force is proportional to |v*sinθ|
c) The direction of the magnetic force is perpendicular to the direction of the magnetic field as well as to direction of the velocity.
d) The magnetic force is also proportional to the magnitude of charge q.
e) Its direction is different and opposite for positive and negative charges.
Magnetic field can be defined mathematically as
F = qv × B
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
Units of magnetic field
The SI unit of magnetic field is newton/ampere-metre. It is written as Tesla.
Tesla is newton/ampere-metre. Tesla is also defined as weber/m².
Another unit in common use is gauss .
1 T = 104 gauss
We have magnetic field of the order of 10-5 near the earth's surface.
Superconducting magnets can create a magnetic field of the order of 10 T.
Earlier, the concept of magnetic field was referred to as magnetic induction.
Electromagnetic field
Electric field and magnetic field are not basically independent. They are two aspects of same entity electromagnetic field. Whether the electromagnetic field will show up as an electric field or a magnetic field or a combination depends on the frame from which we are looking at the field.
Motion of a Charged particle in a uniform magnetic field.
Magnetic force on a charged particle is perpendicular to its velocity. Hence there will not any change in its speed or kinetic energy.
The magnetic force will deflect the particle without changing speed and in a uniform field, the particle will move along a circle perpendicular to the magnetic field. The conclusion is that, the magnetic force provides centripetal force.
If r be the radius of the circle,
qvB = mv²/r (LHS is the expression for magnetic force and RHS is expression mass * acceleration)
r = mv/qB
The time taken to complete the circle is
T = 2πr/v = 2πm/qB
The time period or time taken to complete one circle is independent of speed.
But the radius depends on v. Hence if speed increases, the radius is larger.
Frequency of revolutions is
ν = 1/T = qB/2πm ... (34.4)
This frequency is called cyclotron frequency.
If the velocity of charge is not perpendicular to the magnetic field, the resultant path will be a helix.
The radius of the path will be determined by velocity component which is perpendicular to the magnetic field.
Magnetic Force on a current carrying wire
In a current carrying wire, electrons, which are charge carrying particles are moving and hence in a magnetic field, a current carrying conductor would experience magnetic force.
If a straight wire of length l carry8ng a current i is placed in a uniform magnetic field B, the force on it is
F = il×B
The quantity il denotes current element of length of l.
Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsin θ
Where i = current in the loop
A = area
B = magnetic field
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define
Г = iA× B
iA can be termed as μ the magnetic dipole moment or simply magnetic moment of the current loop.
If there are n turns in the loop, each turn experiences a torque.
The net torque is
Г = niA× B
μ = niA
Magnetic field exerts force on a charge particle
Some facts about the magnetic force
a) From a point P, a charge particle can move in any direction or along any line. Along one of these possible lines, if the charge is moving, there is no magnetic force. Magnetic force is defined to be acting along this line.
b) The magnitude of the magnetic force is proportional to the product of speed of the charged particle v and sinθ, θ being the angle the speed makes with the line along which magnetic field is acting. Hence magnetic force is proportional to |v*sinθ|
c) The direction of the magnetic force is perpendicular to the direction of the magnetic field as well as to direction of the velocity.
d) The magnetic force is also proportional to the magnitude of charge q.
e) Its direction is different and opposite for positive and negative charges.
Magnetic field can be defined mathematically as
Vr(F) = qVr(v) × Vr(B) (34.1)
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
Units of magnetic field
The SI unit of magnetic field is newton/ampere-metre. It is written as Tesla.
Tesla is newton/ampere-metre. Tesla is also defined as weber/m².
Another unit in common use is gauss .
1 T = 104 gauss
We have magnetic field of the order of 10-5 near the earth's surface.
superconducting magnets can create a magnetic field of the order of 10 T.
Earlier, the concept of magnetic field was referred to as magnetic induction.
Electromagnetic field
Electric field and magnetic field are not basically independent. They are two aspects of same entity electromagnetic field. Whether th electromagnetic field will show up as an electric field or a magnetic field or a combination depends on the frame from which we are looking at the field.
Motion of a Charged particle in a uniform magnetic field.
Magentic force on a charged particle is perpendicular to its velocity. Hence there will not any change in its speed or kinetic energy.
The magnetic force will deflect the particle without changing speed and in a uniform field, the particle will move along a circle perpendicular to the magnetic field. The conclusion is that, the magnetic force provides centripetal force.
If r be the radius of the circle,
qvB = mv²/r (LHS is the expression for magnetic force and RHS is expression mass * acceleration)
r = mv/qB ...(34.2)
The time taken to complete the circle is
T = 2πr/v = 2πm/qB ... (34.3)
The time period or time taken to complete one circle is independent of speed.
But the radius (34.2) depends on v. Hence if speed increases, the radius is larger.
Frequency of revolutions is
ν = 1/T = qB/2πm ... (34.4)
This frequency is called cyclotron frequency.
If the velocity of charge is not perpendicular to the magnetic field, the resultant path will be a helix.
The radius of the path will be determined by velocity component which is perpendicular to the magnetic field.
Magnetic Force on a current carrying wire
In a current carrying wire, electrons, which are charge carrying particles are moving and hence in a magnetic field, a current carrying conductor would experince magnetic force.
Vr(F) = iVR(l)×Vr(B) ...(34.6)
Vr is used to denote vector.
The quanity iVr(l) denotes current element of length of l.
Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsinθ
Where i = current in the loop
A = area
B = magnetic field
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define
Vr(Г) = iVr(A)× Vr(B) ...(34.7)
iVr(A) can be termed as Vr(μ) the magnetic dipole moment of simply magentic moment of the current loop.
-------------------
In the material below vectors shown in bold letters.
Definition of magnetic field
Magnetic field exerts force on a moving charged particle
Some facts about the magnetic force
a) From a point P, a charged particle can move in any direction or along any line. Along one of these possible lines, if the charge is moving, there is no magnetic force. Magnetic force is defined to be acting along this line.
b) The magnitude of the magnetic force is proportional to the product of speed of the charged particle v and sinθ, θ being the angle the speed makes with the line along which magnetic field is acting. Hence magnetic force is proportional to |v*sinθ|
c) The direction of the magnetic force is perpendicular to the direction of the magnetic field as well as to direction of the velocity.
d) The magnetic force is also proportional to the magnitude of charge q.
e) Its direction is different and opposite for positive and negative charges.
Magnetic field can be defined mathematically as
F = qv × B
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
Units of magnetic field
The SI unit of magnetic field is newton/ampere-metre. It is written as Tesla.
Tesla is newton/ampere-metre. Tesla is also defined as weber/m².
Another unit in common use is gauss .
1 T = 104 gauss
We have magnetic field of the order of 10-5 near the earth's surface.
Superconducting magnets can create a magnetic field of the order of 10 T.
Earlier, the concept of magnetic field was referred to as magnetic induction.
Electromagnetic field
Electric field and magnetic field are not basically independent. They are two aspects of same entity electromagnetic field. Whether the electromagnetic field will show up as an electric field or a magnetic field or a combination depends on the frame from which we are looking at the field.
Motion of a Charged particle in a uniform magnetic field.
Magnetic force on a charged particle is perpendicular to its velocity. Hence there will not any change in its speed or kinetic energy.
The magnetic force will deflect the particle without changing speed and in a uniform field, the particle will move along a circle perpendicular to the magnetic field. The conclusion is that, the magnetic force provides centripetal force.
If r be the radius of the circle,
qvB = mv²/r (LHS is the expression for magnetic force and RHS is expression mass * acceleration)
r = mv/qB
The time taken to complete the circle is
T = 2πr/v = 2πm/qB
The time period or time taken to complete one circle is independent of speed.
But the radius depends on v. Hence if speed increases, the radius is larger.
Frequency of revolutions is
ν = 1/T = qB/2πm ... (34.4)
This frequency is called cyclotron frequency.
If the velocity of charge is not perpendicular to the magnetic field, the resultant path will be a helix.
The radius of the path will be determined by velocity component which is perpendicular to the magnetic field.
Magnetic Force on a current carrying wire
In a current carrying wire, electrons, which are charge carrying particles are moving and hence in a magnetic field, a current carrying conductor would experience magnetic force.
If a straight wire of length l carry8ng a current i is placed in a uniform magnetic field B, the force on it is
F = il×B
The quantity il denotes current element of length of l.
Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsin θ
Where i = current in the loop
A = area
B = magnetic field
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define
Г = iA× B
iA can be termed as μ the magnetic dipole moment or simply magnetic moment of the current loop.
If there are n turns in the loop, each turn experiences a torque.
The net torque is
Г = niA× B
μ = niA
Concept Review Ch.35 Magnetic Field Due to A Current
A magnetic field can be produced by moving charges or electric currents(electric current is moving charged particles - electrons).
Biot-Savart law
Biot-Savart law is the basic equation that gives us the magnetic field due to electric current in a conductor.
The magnetic field due to a current element dl at a point P with a distance r from dl is
Vector of dB = Vr(dB) = [1/4πε0c²]i[Vr(dl)×Vr(r)]/r³ ...(35.1)
where c = speed of light
i = current
Vr(dl) = length vector of the current element
Vr(r) = ector joining the current element to the point P where we are finding magnetic field
[1/ε0c²] is written as μ0 and is called the permeability of vacuum.
The value of μ0 is 4π*10-7
Vector of dB = Vr(dB) = [μ0i/4π][Vr(dl)×Vr(r)]/r³ ... (35.2)
The magnitude of the magnetic field is
dB = [μ0idl sinθ /4πr²]
Where θ is the angle between current element and the vector joining current element and the point P.
The direction of the field is perpendicular to the plane containing the current element and the point.
Magnetic field due to current in a straight wire at a point P with a distance d from it.
B = [μ0i/4πd][cosθ1 - cosθ2]
θ1 and θ2 are the values of θ corresponding to the lower end and the upper end respectively of the straigth wire.
See the Fig 35.3 to remember the method of measuring θ.
If point P is on a perpendicular bisector of the wire.
θ1 and θ2 are equal. If the length of the wire is α and distance of the point P is d from the wire
cosθ1 = α/SQRT(α²+ 4d²)
cosθ2 = - α/SQRT(α²+ 4d²)
θ1 is anlge withlower end of the wire.
θ2 is anle with the upper end of the wire.
B = [μ0iα]/[2πdSQRT(α²+ 4d²)]
If the straight wire is a very long one
θ1 = 0 and θ2 is equal to π. So
B = μ0i/2πd ... (35.6)
Magnetic field lines
Magnetic field lines are similar to electric field lines. A tangent to a magnetic field line gives the direction of the magnetic field existing at that point. For a long straight wire, the field lines are circles with their centres on the wire.
Force between parallel wires carryng current
If the two wires are treated as long straight wires carrying current i1 (W1) and i2 (W2)
Field on an element on the wire carrying current i2 is
B = μ0i1/2πd
Magnetic force on the element
dF = i2dlμ0i1/2πd
So the force per unit length of the wire
W2 due to the wire W1 is
dF/dl = i2μ0i1/2πd
= μ0i1i2/2πd ...(35.7)
Same amount of force is applied by W2 on unit length of W1.
If both the wires carry current in same direction they attract each other. If they carry current in opposite directions, they repel each other.
Definition of ampere
If two parallel, long wires, kept 1 m apart in vacuum, carry equal currents in the same directin and there is a force of attraction of 2*10-7 newton per metre of each wire, the current in each wire is said to be 1 ampere.
Field due to a circular current
Field at the centre
Radius of circular loop = a
current in the loop = i
B = μ0i/2a
Field at an axial point due to a circular conductor
B = μ0ia²/2(a²+d²)^(3/2)
where
a = radius of the circular conductor
d is the distance of the point from the centre of the circular conductor
If the field is far away from the centre
d>>a
B = 2μ0πia²/4πd³
As πia² is magnetic dipole moment of circular conductor (μ)
B = 2μ0μ/4πd³ ... (35.9)
Ampere's law
The circulation of Line integral of Vr(B).Vr(dl)of the resultant magnetic field along a closed, plane curve is equal to μ0 times the total current crossing the area bounded by the closed curve provided the electric field inside the loop remains constant.
Line integral of Vr(B).Vr(dl) = μ0i ... (35.10)
You can derive the magnetic field at a point due to current in a long straight wire
using Ampere's law and verify that the formula is the same as the one derived by using Biot Savart Law.
Ampere's law can be derived from Biot-Savart law and Biot-Savart law from Ampere's law.
Ampere's law is useful under certain symmetrical conditions.
Finding magnetic field at a point due to a long, straight current using Ampere's law
Solenoid
A solenoid is an insulated wire wound closely in the form of a helix. The length of the solenoid is large compared to its radius of its loop.
The magnetic field inside a very tightly wound long solenoid is uniform everywhere and it zero outside it.
B = μ0ni ...(35.11)
n= number of turns per unit length
Toroid
If a nonconducting ring is taken and a conducting wire is wound closely around it we get a toroid.
In a toroid magnetic field is
B = μ0Ni/2πr
Where N = number of turns in the toroid
r = is the distance of point P (where we have to find the magnetic field) from the centre of the toroid.
Biot-Savart law
Biot-Savart law is the basic equation that gives us the magnetic field due to electric current in a conductor.
The magnetic field due to a current element dl at a point P with a distance r from dl is
Vector of dB = Vr(dB) = [1/4πε0c²]i[Vr(dl)×Vr(r)]/r³ ...(35.1)
where c = speed of light
i = current
Vr(dl) = length vector of the current element
Vr(r) = ector joining the current element to the point P where we are finding magnetic field
[1/ε0c²] is written as μ0 and is called the permeability of vacuum.
The value of μ0 is 4π*10-7
Vector of dB = Vr(dB) = [μ0i/4π][Vr(dl)×Vr(r)]/r³ ... (35.2)
The magnitude of the magnetic field is
dB = [μ0idl sinθ /4πr²]
Where θ is the angle between current element and the vector joining current element and the point P.
The direction of the field is perpendicular to the plane containing the current element and the point.
Magnetic field due to current in a straight wire at a point P with a distance d from it.
B = [μ0i/4πd][cosθ1 - cosθ2]
θ1 and θ2 are the values of θ corresponding to the lower end and the upper end respectively of the straigth wire.
See the Fig 35.3 to remember the method of measuring θ.
If point P is on a perpendicular bisector of the wire.
θ1 and θ2 are equal. If the length of the wire is α and distance of the point P is d from the wire
cosθ1 = α/SQRT(α²+ 4d²)
cosθ2 = - α/SQRT(α²+ 4d²)
θ1 is anlge withlower end of the wire.
θ2 is anle with the upper end of the wire.
B = [μ0iα]/[2πdSQRT(α²+ 4d²)]
If the straight wire is a very long one
θ1 = 0 and θ2 is equal to π. So
B = μ0i/2πd ... (35.6)
Magnetic field lines
Magnetic field lines are similar to electric field lines. A tangent to a magnetic field line gives the direction of the magnetic field existing at that point. For a long straight wire, the field lines are circles with their centres on the wire.
Force between parallel wires carryng current
If the two wires are treated as long straight wires carrying current i1 (W1) and i2 (W2)
Field on an element on the wire carrying current i2 is
B = μ0i1/2πd
Magnetic force on the element
dF = i2dlμ0i1/2πd
So the force per unit length of the wire
W2 due to the wire W1 is
dF/dl = i2μ0i1/2πd
= μ0i1i2/2πd ...(35.7)
Same amount of force is applied by W2 on unit length of W1.
If both the wires carry current in same direction they attract each other. If they carry current in opposite directions, they repel each other.
Definition of ampere
If two parallel, long wires, kept 1 m apart in vacuum, carry equal currents in the same directin and there is a force of attraction of 2*10-7 newton per metre of each wire, the current in each wire is said to be 1 ampere.
Field due to a circular current
Field at the centre
Radius of circular loop = a
current in the loop = i
B = μ0i/2a
Field at an axial point due to a circular conductor
B = μ0ia²/2(a²+d²)^(3/2)
where
a = radius of the circular conductor
d is the distance of the point from the centre of the circular conductor
If the field is far away from the centre
d>>a
B = 2μ0πia²/4πd³
As πia² is magnetic dipole moment of circular conductor (μ)
B = 2μ0μ/4πd³ ... (35.9)
Ampere's law
The circulation of Line integral of Vr(B).Vr(dl)of the resultant magnetic field along a closed, plane curve is equal to μ0 times the total current crossing the area bounded by the closed curve provided the electric field inside the loop remains constant.
Line integral of Vr(B).Vr(dl) = μ0i ... (35.10)
You can derive the magnetic field at a point due to current in a long straight wire
using Ampere's law and verify that the formula is the same as the one derived by using Biot Savart Law.
Ampere's law can be derived from Biot-Savart law and Biot-Savart law from Ampere's law.
Ampere's law is useful under certain symmetrical conditions.
Finding magnetic field at a point due to a long, straight current using Ampere's law
Solenoid
A solenoid is an insulated wire wound closely in the form of a helix. The length of the solenoid is large compared to its radius of its loop.
The magnetic field inside a very tightly wound long solenoid is uniform everywhere and it zero outside it.
B = μ0ni ...(35.11)
n= number of turns per unit length
Toroid
If a nonconducting ring is taken and a conducting wire is wound closely around it we get a toroid.
In a toroid magnetic field is
B = μ0Ni/2πr
Where N = number of turns in the toroid
r = is the distance of point P (where we have to find the magnetic field) from the centre of the toroid.
Friday, February 8, 2008
IIT JEE Physics Formula Revision 34. Magnetic Field
1. Magnetic field can be defined mathematically as
F = qv × B
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
F = force (vector)
q = charge
v = velocity (vector)
B = magnetic field (vector)
2. Motion of a Charged particle in a uniform magnetic field
qvB = mv²/r
r = mv/qB
The time taken to complete the circle is
T = 2πr/v = 2πm/qB
Frequency of revolutions is
ν = 1/T = qB/2πm
This frequency is called cyclotron frequency.
6. If a straight wire of length l carry8ng a current i is placed in a uniform magnetic field B, the force on it is
F = il×B
Where
i = current in the conductor
l = vector of length of the conductor
B = magnetic field
7. Formula for Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsin θ
Where i = current in the loop
A = area (magnitude)
B = magnetic field (magnitude)
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define in terms of vector
Г = iA× B
iA can be termed as μ the magnetic dipole moment or simply magnetic moment of the current loop.
If there are n turns in the loop, each turn experiences a torque.
The net torque is
Г = niA× B
μ = niA
F = qv × B
Equation uniquely determines the direction of magnetic field B from the rules of the vector product.
F = force (vector)
q = charge
v = velocity (vector)
B = magnetic field (vector)
2. Motion of a Charged particle in a uniform magnetic field
qvB = mv²/r
r = mv/qB
The time taken to complete the circle is
T = 2πr/v = 2πm/qB
Frequency of revolutions is
ν = 1/T = qB/2πm
This frequency is called cyclotron frequency.
6. If a straight wire of length l carry8ng a current i is placed in a uniform magnetic field B, the force on it is
F = il×B
Where
i = current in the conductor
l = vector of length of the conductor
B = magnetic field
7. Formula for Torque on a current loop
If there is a rectangular loop carrying current i in a uniform magnetic field B
then net torque acting on the loop is
Г = iABsin θ
Where i = current in the loop
A = area (magnitude)
B = magnetic field (magnitude)
θ = the angle of inclination of the loop with the plane perpendicular to the plane of magnetic field.
We can also define in terms of vector
Г = iA× B
iA can be termed as μ the magnetic dipole moment or simply magnetic moment of the current loop.
If there are n turns in the loop, each turn experiences a torque.
The net torque is
Г = niA× B
μ = niA
IIT JEE Physics Formula Revision 35. Magnetic field due to a Current
Note: vectors are shown in bold letters
1. Biot Savart Law
dB = [1/4 π ε0c²]*(i) (dl*r/r³) ... (1)
where
dB = magnetic field at point P, due to current element dl
c = speed of light
i = current
r = vector joining the current element to the point P.
[1/ ε0c²] is written as µ0 and is called the permeability of vacuum.
Its value is 4 π*10-7 T-m/A
In terms of µ0 equation (1) becomes
dB = (µ0 /4 π)*(i) (dl*r/r³) ... (2)
The magnitude of the field
dB = (µ0 /4 π)*(idl sin θ/r²)
where θ is the angle between dl and r.
the direction of the field is perpendicular to the palne containing the current element and the point P according to the rules of the cross product.
4. Magnetic field due to current in a straight wire
B = (µ0i /4 πd) (cos θ1 – cos θ2) … (4)
θ1 and θ2 and the value of θ corresponding to the lower end and the upper end respectively.
If the point P is on the perpendicular bisector of the straight wire
B = (µ0i /4 πd) [2a/√(a² +4d²)] … (5)
a = length of the wire
d = distance between the wire and point P (perpendicular distance)
If the wire is very long such that θ1 = 0 and θ2 = π.
The equation is B = (µ0i /2 πd) … (6)
7. Force between two parallel currents
dF/dl = (µ0i1i2 )/2 πd
dF/dl = force per unit length of the wire W2 due to wire W1
i1,i2 = current in wire W1 and W2 respectively
d = distance between wires kept parallel to each other.
8. Magnetic field in an axial point
B = (µ0ia²)/[2(a²+d²)3/2] .. (8)
If the point is far away from the centre d is very large compared to a
B = (µ0ia²)/2d³
If the magnetic dipole moment of due to the circular conductor with area πa² and current flowing through it is ‘i’, the µ = i πa² and B is
B = (µ0i /4π)(2µ/d³) .. (9)
10. Ampere’s law
The circulation of ∫B.dl of the resultant magnetic field along a closed plane curve is equal to µ0 times the total current crossing the area bounded by the closed curve provided the electric field inside the loop remains constant.
The circulation ∫B.dl over closed curve = µ0*I … (10)
11. Magnetic field inside a solenoid
B = µ0ni
n = number of turns per unit length along the length of the solenoid.
i = current passing through the solenoid
12. toroid
B = µ0Ni/2πr
Where
N = total number of turns
i = current in the toroid
r = distance of the point at which field is being calculated from centre of the toroid.
Join
IIT JEE academy orkut community.
http://www.orkut.co.in/Community.aspx?cmm=39291603
1. Biot Savart Law
dB = [1/4 π ε0c²]*(i) (dl*r/r³) ... (1)
where
dB = magnetic field at point P, due to current element dl
c = speed of light
i = current
r = vector joining the current element to the point P.
[1/ ε0c²] is written as µ0 and is called the permeability of vacuum.
Its value is 4 π*10-7 T-m/A
In terms of µ0 equation (1) becomes
dB = (µ0 /4 π)*(i) (dl*r/r³) ... (2)
The magnitude of the field
dB = (µ0 /4 π)*(idl sin θ/r²)
where θ is the angle between dl and r.
the direction of the field is perpendicular to the palne containing the current element and the point P according to the rules of the cross product.
4. Magnetic field due to current in a straight wire
B = (µ0i /4 πd) (cos θ1 – cos θ2) … (4)
θ1 and θ2 and the value of θ corresponding to the lower end and the upper end respectively.
If the point P is on the perpendicular bisector of the straight wire
B = (µ0i /4 πd) [2a/√(a² +4d²)] … (5)
a = length of the wire
d = distance between the wire and point P (perpendicular distance)
If the wire is very long such that θ1 = 0 and θ2 = π.
The equation is B = (µ0i /2 πd) … (6)
7. Force between two parallel currents
dF/dl = (µ0i1i2 )/2 πd
dF/dl = force per unit length of the wire W2 due to wire W1
i1,i2 = current in wire W1 and W2 respectively
d = distance between wires kept parallel to each other.
8. Magnetic field in an axial point
B = (µ0ia²)/[2(a²+d²)3/2] .. (8)
If the point is far away from the centre d is very large compared to a
B = (µ0ia²)/2d³
If the magnetic dipole moment of due to the circular conductor with area πa² and current flowing through it is ‘i’, the µ = i πa² and B is
B = (µ0i /4π)(2µ/d³) .. (9)
10. Ampere’s law
The circulation of ∫B.dl of the resultant magnetic field along a closed plane curve is equal to µ0 times the total current crossing the area bounded by the closed curve provided the electric field inside the loop remains constant.
The circulation ∫B.dl over closed curve = µ0*I … (10)
11. Magnetic field inside a solenoid
B = µ0ni
n = number of turns per unit length along the length of the solenoid.
i = current passing through the solenoid
12. toroid
B = µ0Ni/2πr
Where
N = total number of turns
i = current in the toroid
r = distance of the point at which field is being calculated from centre of the toroid.
Join
IIT JEE academy orkut community.
http://www.orkut.co.in/Community.aspx?cmm=39291603
Tuesday, October 23, 2007
Study guide H C Verma JEE Physics Ch. 35 MAGNETIC FIELD DUE TO A CURRENT
JEE SYLLABUS
Biot–Savart’s law 35.1 and
Ampere’s law;
Magnetic field near a current-carrying straight wire, along the axis of a circular coil and inside a long straight solenoid;
Force on a moving charge and on a current-carrying wire in a uniform magnetic field.
-----------------
Topics covered in H C Verma
35.1 Bio Savart Law
35.2 Magnetic field due to current in a straight wire
35.3 Force between parallel currents
35.4 Field due to a circular current
35.5 Ampere's law
35.6 Magnetic field at a point due to a long straight current
35.7 Solenoid
35.8 Toroid
--------------
Study Plan
Day 1
35.1 Bio Savart Law
35.2 Magnetic field due to current in a straight wire
35.3 Force between parallel currents
WOE 1
Exercises 1,2
Day 2
35.4 Field due to a circular current
35.5 Ampere's law
35.6 Magnetic field at a point due to a long straight current
WOE 2 to 5
Day 3
35.7 Solenoid
35.8 Toroid
Exercises 3 to 10
Day 4
WOE 6 to 10
Exercises 11 to 15
Day 5
WOE 11 to 15
Exercises 16 to 20
Day 6
Exercises 21 to 30
Day 7
Exercises 31 to 40
Day 8
Exercises 41 to 50
Day 9
Exercises 51 to 61
Day 10
Objective I and II
Questions for short answer
Revision Period
Day 11
Concept review
Day 12
Formula review
Days 13 to 20
Test paper problems
--------------
A magnetic field can be represented by lines called the lines of magnetic induction. It also expresses the strength of the mangetic field and it is a vector quantity. In a magentic field, the magnitude of magentic induction is equal to the magnetic flux per unit area at that point.
The unit of magnetic flux is called the weber (symbol Wb). As magnetic induction is equal to the magentic flux per unit area, the SI unit of magnetic induction is weber/metre^2, i.e, Wb/m^2. This unit is also called the tesla (symbol T0
Bio Savart Law
Consider a small element of length dl, of a conductor carrying a current I. Let P be any point at a distance r from the centre of the element along a line making an angle θ with the element. Then, according to this law, the magnetic induction dB at the point P due to the current element dl is given by
dB α I(dl)sinθ/r²
dB = K*I(dl)sinθ/r²
where K is a constant of proportionality whose value depends upon the system of units.
In the SI sytem, K for vacuum or air is written as Mu/4Pi and its value comes out to be 10^(-7) Wb/Am.
Magnetic induction is vector quantity and its direction can be determined by using the right hand rule.
Biot–Savart’s law 35.1 and
Ampere’s law;
Magnetic field near a current-carrying straight wire, along the axis of a circular coil and inside a long straight solenoid;
Force on a moving charge and on a current-carrying wire in a uniform magnetic field.
-----------------
Topics covered in H C Verma
35.1 Bio Savart Law
35.2 Magnetic field due to current in a straight wire
35.3 Force between parallel currents
35.4 Field due to a circular current
35.5 Ampere's law
35.6 Magnetic field at a point due to a long straight current
35.7 Solenoid
35.8 Toroid
--------------
Study Plan
Day 1
35.1 Bio Savart Law
35.2 Magnetic field due to current in a straight wire
35.3 Force between parallel currents
WOE 1
Exercises 1,2
Day 2
35.4 Field due to a circular current
35.5 Ampere's law
35.6 Magnetic field at a point due to a long straight current
WOE 2 to 5
Day 3
35.7 Solenoid
35.8 Toroid
Exercises 3 to 10
Day 4
WOE 6 to 10
Exercises 11 to 15
Day 5
WOE 11 to 15
Exercises 16 to 20
Day 6
Exercises 21 to 30
Day 7
Exercises 31 to 40
Day 8
Exercises 41 to 50
Day 9
Exercises 51 to 61
Day 10
Objective I and II
Questions for short answer
Revision Period
Day 11
Concept review
Day 12
Formula review
Days 13 to 20
Test paper problems
--------------
A magnetic field can be represented by lines called the lines of magnetic induction. It also expresses the strength of the mangetic field and it is a vector quantity. In a magentic field, the magnitude of magentic induction is equal to the magnetic flux per unit area at that point.
The unit of magnetic flux is called the weber (symbol Wb). As magnetic induction is equal to the magentic flux per unit area, the SI unit of magnetic induction is weber/metre^2, i.e, Wb/m^2. This unit is also called the tesla (symbol T0
Bio Savart Law
Consider a small element of length dl, of a conductor carrying a current I. Let P be any point at a distance r from the centre of the element along a line making an angle θ with the element. Then, according to this law, the magnetic induction dB at the point P due to the current element dl is given by
dB α I(dl)sinθ/r²
dB = K*I(dl)sinθ/r²
where K is a constant of proportionality whose value depends upon the system of units.
In the SI sytem, K for vacuum or air is written as Mu/4Pi and its value comes out to be 10^(-7) Wb/Am.
Magnetic induction is vector quantity and its direction can be determined by using the right hand rule.
Subscribe to:
Posts (Atom)